Multitech ISIHP-4U Uživatelská příručka Strana 115

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 130
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 114
115
Chapter 5 - AT Commands
the type of line each customer has, and if that line is labeled as a data line (modem or fax), it
will not accept a speech call originated on that line. However, 3.1 kHz audio information
transfer capability is allowed on data lines (modem or fax) by most switches. S55 also lets
you define whether a progress indicator information element (which indicates that the
origination address of the POTS call is non-ISDN) is sent with the SETUP message for the
POTS port call. This may help POTS port calls get through certain CO switches.
S1 Speech, no progress indicator
S2 3.1 kHz Audio, no progress indicator
S17 Speech, origination address is non-ISDN
S18 3.1 kHz Audio, origination address is non-ISDN
S56 Calling Party Number IE Settings
(applies to NET3 [!C0=2] switch type only)
Unit: decimal ASCII code
Range: 128 Disable
Type of Number
0 Unknown,
16 International
32 National
48 Network specific
64 Subscriber
96 Abbreviated
Numbering Plan
0 Unknown
1 ISDN/telephony
3 Data
4 Telex
8 National standard
9 Private
Default: 128 (disabled)
Modifies the value of Octet 3 of the Calling Party Number Information Element that is sent
within the SETUP message for data and POTS port (voice/modem/fax) calls. To set a specific
number type and numbering plan, select an option from the Type of Number section above and
add its value to the value of an option in the Numbering Plan section above. For example, a
National/ISDN Calling Party Number IE would be S56=33, where 32 (National) + 1 (ISDN/
telephony) = 33 (National/ISDN). If there is no Data Directory Number (for data calls) nor
Voice Directory Number (for voice/modem/fax calls), no Calling Party Number IE is sent. By
default S56=128, which means no Calling Party Number IE is sent.
S57 Called Party Number IE Settings
(applies to NET3 [!C0=2] switch type only)
Unit: decimal ASCII code
Range: 128 Disable
Type of Number
0 Unknown,
16 International
Zobrazit stránku 114
1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 129 130

Komentáře k této Příručce

Žádné komentáře

Ariston Réfrigérateurs manuels d'utilisation

À partir de M

Cliquez sur un alphabet ci-dessous pour faire défiler la liste complète des modèles commençant par cette lettre

Modèles Type de document
MBA 4031 CVE
Manuel de l'utilisateur      Инструкция по эксплуатации Ariston MBA 4031 CVE, 64 pages
MBL 2011
Manuel de l'utilisateur      Ariston MBL 2011 User Manual, 52 pages
MBL 2021 HA
Manuel de l'utilisateur      Ariston MBL 2021 HA User Manual, 52 pages
MBT 1812 IZS RU
Manuel de l'utilisateur   Инструкция по эксплуатации Ariston MBT 1812 IZS RU, 14 pages
MBT 1911 FI
Manuel de l'utilisateur   Инструкция по эксплуатации Ariston MBT 1911 FI, 14 pages
MBT 1911 FI/HA
Manuel de l'utilisateur       Ariston MBT 1911 FI/HA User Manual, 72 pages
MBT 2012 HA
Manuel de l'utilisateur      Ariston MBT 2012 HA User Manual, 72 pages
MBT 2022 HA
Manuel de l'utilisateur       Ariston MBT 2022 HA User Manual, 72 pages
MBZE 45 NF
Manuel de l'utilisateur       Ariston MBZE 45 NF User Manual, 72 pages
MTM 1711
Manuel de l'utilisateur      Ariston MTM 1711 User Manual, 52 pages
MTM 1712 FF/HA
Manuel de l'utilisateur      Ariston MTM 1712 FF/HA User Manual, 72 pages
MTM 1901
Manuel de l'utilisateur      Ariston MTM 1901 User Manual, 32 pages
MTM 1921
Manuel de l'utilisateur       Ariston MTM 1921 User Manual, 80 pages
MTP 1911 F/HA
Manuel de l'utilisateur      Ariston MTP 1911 F/HA User Manual, 60 pages
MTP 1912 F/HA
Manuel de l'utilisateur      Ariston MTP 1912 F/HA User Manual, 60 pages