Multitech MT1432BA Uživatelský manuál Strana 115
- Strana / 166
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
115
Chapter 9 - DIP-Switch Settings
9.3 Speaker Volume Control
You can adjust the volume of the modem’s phone-line monitor speaker with a volume control knob,
located on the back of the modem next to the RS-232C connector (see Figure 9-1 for location). Turn
the knob clockwise to increase the modem's volume and counterclockwise to decrease speaker
volume. See Speaker Control Command (M) in Section 5.4.6.
9.4 Recording Option Configurations
This section lets you record any changes you may have made to the DIP-Switch settings. Circle the
appropriate setting and record the effect for future reference.
DIP-Switches
Switch Function Position Effect
#1 Force DTR/DTR from Interface* UP*
DOWN
#2 Flow Control &E4*/&E5 UP*
(Async/Dial-Up/Leased Line) DOWN
#2 SDLC*/BSC (Sync) UP*
DOWN
#3 Result Codes Enable*/Disable UP
(Async/Dial-up) DOWN*
#3 DbM Transmit
(-9db/0dB)*/(-15db/-10dB) UP
(Async/Sync/Lease-Line) DOWN*
#4 UUCP Enable/Disable* UP*
(Async/Dial-Up/Leased Line) DOWN
#4 AS/400 Enable/Disable* UP*
(Sync/Dial-Up/Leased line) DOWN
#5 Auto-Answer Enable*/Disable UP*
(Async/Sync/Dial-Up) DOWN
#5 Answer*/Originate DOWN
(Async/Sync/Leased Line) UP*
#6 Max-Thru Enable*/Disable UP*
(Async/Dial-Up/Leased) DOWN
#6 Slave Clock Enable/Disable* UP*
(Sync/Dial-Up/Leased) DOWN
#7 RTS/Normal/Forced* UP
(Sync/Async/Dial/Leased) DOWN*
#8 Command Mode Enabled* UP
(Sync/Async/Dial/Leased) DOWN*
#9 Local/Remote* LoopBack UP
(Async/Sync/Dial/Leased) DOWN*
#10 Dial-Up*/Leased-Line UP*
DOWN
#11 "AT"/"Multi-Tech" Result Codes* UP
(Asynchronous) DOWN*
- BA-Series 1
- Intelligent Data/Fax Modem 1
- User Guide 1
- Contents 3
- Chapter 5 - Command Mode 4
- Chapter 6 - S-Registers 4
- Chapter 8 - Modem Testing 5
- 1.1 Introduction 8
- 1.2 How To Use This Manual 8
- 1.3 Modem Features 10
- 1.3.1 2834 Series Features 10
- 1.3.2 1432 Series Features 10
- 1.3.3 932 Series Features 10
- 1.4 Fax Features 11
- 1.5 Technical Specifications 12
- 1.6 Power 16
- 1.7 Modem LED Indicators 16
- 1.8 Controls on PC Board 17
- MADE IN U.S.A 20
- 2.2 Installation 21
- 2.2.1 Safety Warnings 21
- 2.2.2 Installation Procedure 21
- EIA RS232C 22
- 3.1 Introduction 28
- 3.2 Serial Port Limitations 28
- 3.3 Configuring Your Software 29
- 3.4 PC Initialization Strings 30
- 3.4.2 Other Parameters 30
- 3.5 Macintosh Initialization 31
- 3.6.2 Terminal Emulation 31
- 3.6.3 File Transfer Protocols 32
- 3.8 Modem Basics 33
- 3.8.1 Simple Operations 33
- 4.1 Introduction 36
- 4.2 Dialing/On-Line/Answering 36
- 4.3 Manual Call Origination 37
- 4.4 Automatic Answering 37
- 4.5 Manual Answering 38
- 4.6 Handshaking Details 38
- 4.7 Call Termination 39
- 5.1 Introduction 42
- 5.1.1 AT Command Editing 42
- 5.1.2 Functional Modes 43
- 5.2 Summary of AT Commands 44
- 5.3 Result Codes 47
- 5.4 Dialing Commands 49
- 5.4.1 Dialing Action Commands 49
- 5.4.2 Dial Modifier Commands 50
- Quiet Answer @ 52
- Storing Phone Numbers D...N 53
- Number Linking NN 53
- Modem Reset Z 54
- Unix UUCP Spoofing $SP 55
- Bell/V.21 Tone B 58
- Auto Speed Detect #A 60
- Carrier Detect Control &C 61
- CTS Control &R 61
- Data Set Ready Control &S 62
- Normal Mode &E0 63
- Auto-Reliable Mode &E1 63
- Reliable Mode &E2 63
- V.42 Mode Select #L 64
- Auto-Reliable Buffering $A 64
- Retransmit Count $R 65
- 5.4.9 Flow Control Commands 66
- Xon/Xoff Pass-Through &E7 67
- Send Xon/Xoff Characters #X 67
- Maximum Block Size &BS 68
- Parity Selection #P 68
- Through and Pacing Commands 69
- Speed Conversion $BA 70
- Modem Baud Rate $MB 70
- Serial Port Baud Rate $SB 72
- Help Screens $H 73
- Inquiry for Product Code I 73
- Listing S-Register Values L6 73
- Off Hook H 74
- BREAK AT<CR> 74
- Force Answer Mode A 75
- 6.1 Introduction 78
- Remote Configuration 87
- 7.1 Introduction 88
- Configuration 89
- Change LOGIN Password #I 93
- Change SETUP Password #S 93
- Callback Time Delay (S15) 95
- Callback Attempts (S16) 95
- Local Inactivity Timer (S29) 95
- 8.1 Introduction 98
- Digital Analog 99
- Digital Analog DigitalAnalog 100
- 8.5 Back-to-Back Test 102
- 8.6 Synchronous Mode Testing 103
- MultiModemBA User Guide 106
- 9.1 Introduction 108
- Switch #15 114
- Switch #16 114
- (Reserved for Future Use) 114
- 9.3 Speaker Volume Control 115
- DIP Switches #13-14 116
- DIP Switches #15-16 116
- 10.1 Introduction 118
- 10.2 Limited Warranty 118
- 10.3 Tech Support 119
- 10.4 Service 119
- 10.5 The Multi-Tech BBS 120
- Appendixes 123
- Appendix A - Troubleshooting 124
- I Am Losing Data 128
- Dial Pulses 130
- Tone Dial Frequencies 130
- Appendix D - Command Summary 131
- Password Command Summary 139
- V.25bis Commands 139
- Asynchronous Mode 140
- Synchronous Mode 141
- Delayed and Forbidden Numbers 147
- V.25bis Operation 147
- V.25bis Mode AT Commands 149
- V.25bis AT Commands 150
- DTR Dialing ($D) Command 151
- 25-PIN DTE 154
- Connector 154
- 25-PIN DCE 154
- Test Voltage - Pin 9, XV 158
- Canadian Limitations Notice 162
- Class A Statement 162
Související produkty a manuály pro Modemy Multitech MT1432BA
Modemy Multitech MT5600BAV.90 Uživatelský manuál
(66 stránky)
(66 stránky)
Modemy Multitech MT5634ZBA-V92 Uživatelský manuál
(16 stránky)
(16 stránky)
Modemy Multitech MTCBA-G-GP-F1 Datový list
(25 stránky)
(25 stránky)
Modemy Multitech MultiModem ZBA Uživatelská příručka
(45 stránky)
(45 stránky)
Modemy Multitech MultiModem ZDX Uživatelská příručka
(28 stránky)
(28 stránky)
Modemy Multitech MT5634HD16 Uživatelská příručka
(84 stránky)
(84 stránky)
Modemy Multitech MT3334HD8 Uživatelská příručka
(100 stránky)
(100 stránky)
Modemy Multitech MT5600DSDV2 Uživatelská příručka
(72 stránky)
(72 stránky)
Modemy Multitech MT4X56USB Uživatelská příručka
(96 stránky)
(96 stránky)
Modemy Multitech ISI9234HPCIE Uživatelská příručka
(28 stránky)
(28 stránky)
Modemy Multitech MT2834MR6 Uživatelská příručka
(123 stránky)
(123 stránky)
Modemy Multitech MT5634ZPW-PCI Uživatelský manuál
(94 stránky)
(94 stránky)
Modemy Multitech MT9234MU-CDC Uživatelská příručka
(27 stránky)
(27 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.035 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce