Multitech MT5634ZBA Uživatelská příručka stáhnout pdf (Strana 34)

Chapter 4 - AT Commands, S-Registers, Result Codes

MultiModemDID User Guide

Command: *DF Format for Reporting Incoming DID Number

Values: 0, 1, 2

Default: 0

Description: This command allows for three different reporting formats of

the incoming number information. This information is output

when either the proper number of digits have been received or

the time out timer has expired and before the modem answers

the call. When set to *DFI, the modem will output one line for

every digit received. For the other formats, the modem will only

output one line per call.

*DF0 “DID:xxx” - Default

*DF1 “DTMFx” for each digit

*DF2 “RINGxxx”

Example Sessions

[15:31:29.100] AT+FCLASS=0

[15:31:29.100]

[15:31:29.100] OK

[15:31:29.160] AT*DS1*DD0*DF0*DN4*DT15

[15:31:29.160]

[15:31:29.160] OK

[15:31:29.160] ATS0=1

[15:31:29.160]

[15:31:29.160] OK

[15:31:40.800]

[15:31:40.800] DID:5980

[15:31:54.920] [DCD]

[15:31:54.920] CONNECT 28800 V42bis

[15:32:00.850] 1234567890ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz

[15:32:06.780] 1234567890ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz

[15:32:06.830] 1234567890ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz

[15:32:12.600] 1234567890ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz

[15:32:12.660] 1234567890ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz

[15:32:12.710] +++ATH

[15:32:12.730] [dcd]

[15:32:12.730] NO CARRIER

[15:26:39.260] AT+FCLASS=0

[15:26:39.260]

[15:26:39.260] OK

[15:26:39.260] AT*DS1*DD0*DF1*DN4*DT15

[15:26:39.260]

[15:26:39.260] OK

[15:26:39.310] ATS0=1

[15:26:39.310]

[15:26:39.310] OK

[15:26:52.440]

[15:26:52.440] DTMF5

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 58 59

Komentáře k této Příručce

Žádné komentáře

Multitech MT5634ZBA Uživatelská příručka Strana 34

Komentáře k této Příručce

Související produkty a manuály pro Modemy Multitech MT5634ZBA