Multitech MultiModem MT5634ZBA-V-V92 Uživatelská příručka stáhnout pdf (Strana 10)

Chapter 2 – Installation

10 Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286H)

Connect the Modem to Your PC

Plug one end of the serial cable into the RS232 connector on the modem and the other end into a serial port connector on

your computer, such as COM1 or COM2.

Connect the Modem to the Telephone Line

Plug one end of the modular telephone cable into the modem’s LINE jack and the other end into a standard phone wall jack.

Important: The LINE jack is not interchangeable with the PHONE jack. Do not plug the telephone into the LINE jack or the line

cable into the PHONE jack.

Note: Regulatory agencies may impose certain restrictions on equipment connected to public telephone systems. For more

information, see Appendix A.

Connect the Two-Wire Leased Line (Leased Line Only)

Plug one end of a two-wire telephone cable into the modem’s LINE jack and the other end to a two-wire leased line wall jack or

terminals.

Note: Before you can use the modem on a leased line, you must first change the internal jumpers. See “Step 2: Change the

Internal Jumpers.”

Connect the Modem to a Phone (Optional)

If you want to connect a phone to the same line as the modem, plug it into the modem’s PHONE jack.

Important: The PHONE jack is not interchangeable with the LINE jack. Do not plug the telephone into the LINE jack or the line

cable into the PHONE jack.

Connect a Microphone (Voice Option)

For voice mail or speakerphone applications, plug an unamplified microphone into the MIC jack on the side of the modem. The

microphone should have a stereo 1/8-inch mini plug. Do not use a monophonic microphone.

Connect Speakers (Voice Option)

For speakerphone or voice mail applications, use a 1/8-inch mini plug male-to-male stereo patch cord to connect the SPKR

jack on the side of the modem to the LINE IN jack on your sound card. If your sound card does not have a LINE IN jack, use

its MIC jack. The stereo male-to-male patch cord can be purchased at a local PC retail store.

If you do not have a sound card, you can plug an unamplified speaker directly into the SPKR jack.

Connect the Modem to the AC Power Outlet

The power switch is located on the right side of the modem. Make sure it is set to OFF.

For the global products, plug the universal power supply into the PWR jack on the modem. Then plug one end of the country-

specific power supply cord into the universal power supply and the other end into a power outlet or power strip.

For Non-global products, plug the power supply lead into the PWR jack on the modem. Plug the transformer into a power

outlet or power strip.

Note: Use only the power supply supplied with the modem. Use of any other power supply voids the warranty and can damage

the modem.

Power-On Test

Test the modem by turning it on. When you turn it on, the modem performs a diagnostic self-test, after which the 56 indicator

should light. If this does not happen, check that the power switch is on, the power supply is solidly connected, and the AC

outlet is live. If these measures do not work, see Chapter 7, “Troubleshooting.”

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 41 42

Žádné komentáře

Multitech MultiModem MT5634ZBA-V-V92 Uživatelská příručka Strana 10