Multitech MT5634ZBAV Uživatelská příručka stáhnout pdf (Strana 53)

3 Features

Note: Although the modem can connect at lower than V.32bis

speeds, no speed indicator lights during the connection.

Off-Hook. The OH LED lights when the modem is off-hook, which

occurs when the modem is dialing, online, or answering a call. The

LED flashes when the modem pulse-dials.

Terminal Ready. The TR LED lights when a datacomm program

initializes the modem. It means the modem is ready for an outgo-

ing or incoming call. It goes off when the datacomm program

disconnects the COM port. When it goes off, a connected modem

will disconnect. The state of the TR LED matches that of the DTR

circuit on pin 20 of the RS-232C/V.24 interface.

Error Correction (V.42). The EC LED lights continuously when

the modem is in V.42 error correction mode, and blinks when com-

pression is activated.

Fax. The FX LED lights when the modem is in fax mode.

Note: When you turn on the modem, the speed lights flash briefly as

the modem does a self-test, then the LED for the default modem baud

rate lights. The default rate for the modem is 56K bps unless you select

and store another baud rate. After a call, the LEDs for the connection’s

baud rate remain lit until another call is made or the modem is reset. If

you connect at a rate under 14,400 bps, all speed LEDs remain off after

the connection is broken, even though the modem is still turned on.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 169 170

Žádné komentáře

Multitech MT5634ZBAV Uživatelská příručka Strana 53