Multitech MTCMR-E1 Uživatelská příručka stáhnout pdf (Strana 10)

MultiModem rCell Intelligent Wireless Router

10 Multi-Tech Systems, Inc. Quick Start Guide

Init String – 4 modem initialization strings are allowed.

PPP Authentication

Authentication Type – Click the button corresponding to the

authentication protocol you want to use to negotiate with the remote

peer. PAP, CHAP, or PAP-CHAP.

Default = PAP-CHAP

User Name – Enter the PPP User Name (it authenticates the remote

peer).

Password – Enter the PPP Password (it authenticates the remote

peer).

Important Note About Submit and Save & Restart

Click the Submit button located at the bottom of most screens to

save any changes you make. Then you must click the Save &

Restart button in order for your settings to take effect. Save &

Restart does not have to be executed after each screen; you can

change and Submit several screens, and then click Save &

Restart. The Save & Restart button is located on the Menu bar.

Shutdown Caution

Never unplug the power until after you have performed the Save &

Restart process when changing settings. If setup changes are not

properly saved before unplugging the power, data could be lost.

Carrier Activation

Account activation depends on the carrier that you are connecting to. This

activation process can start as soon as the router receives a good signal

from the carrier. This process can start when power is applied to the router.

Ensure that once you have applied power to the router, you do not power

down or reset the device until after you have verify network connectivity.

So after you have set up your Ethernet connection and configured the Web

Management Software, this activation process could already be complete.

When you Telnet into the router to verify signal strength, check network

registration and roaming status, you can issue commands to the router to

verify network connectivity.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Žádné komentáře

Multitech MTCMR-E1 Uživatelská příručka Strana 10