Multitech MultiModem Cell MTCBA-C1 Uživatelská příručka stáhnout pdf (Strana 19)

Chapter 6 – Global Configuration Commands

Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C) 19

Restore Factory Settings &F

Description: This command is used to restore the factory settings from NV memory. This is a standard

Hayes® modem AT command.

See Appendix "Effects of AT&W, ATZ and AT&F

Note: There is a remote chance of NV memory corruption if a reset or power loss occurs during the

processing of this command. This command should be used only during the initial setup of the

operating characteristics.

Syntax: Command syntax: AT&F

Command Possible Responses

AT&F OK

Note: Command valid, modem resets

Save Configuration &W

Description: This command writes the current configuration to NV. See table in Chapter 19 for a list of items.

This is a standard Hayes® modem AT command.

Syntax: Command syntax: AT&W

Command Possible Responses

AT&W OK

Note: Command valid

Reset to Default Configuration Z0

Description: This command is used to restore the configuration last saved by AT&W.

Syntax: Command syntax: ATZ0

Command Possible Responses

ATZ0

Note: reset to default configuration.

Note: Command is valid

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 134 135

Žádné komentáře

Multitech MultiModem Cell MTCBA-C1 Uživatelská příručka Strana 19