Multitech RF825-C-NX-AP Uživatelský manuál stáhnout pdf (Strana 20)

Chapter 2 – Behind NAT Setup Examples

Multi-Tech Systems, Inc. RF825 Series IPSec VPN Setup Examples – A Reference Guide (S000440B) 20

Prerequisite Step 3 – Client Phase 2 Setup (Behind

NAT)

1. Start Phase 2 by right clicking on the name of your VPN Client you created in Phase 1.

2. The VPN Client address will be set to 0.0.0.0 unless you have a Static IP address. Example:

65.126.90.250

3. The Address type is the type of setup on the host side. If it’s a network, then choose

Subnet address and enter the Remote LAN address (Ex. 192.168.25.0) and the Subnet

Mask (Ex. 255.255.255.0). If it’s a single IP address, change it to that address.

4. For ESP Authentication choose MD5.

5. Click OK.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 32 33

Žádné komentáře

Multitech RF825-C-NX-AP Uživatelský manuál Strana 20