Multitech RF825-E-AP Uživatelská příručka Strana 9

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 12
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 8
Quick Start Guide RouteFinder RF825 Series
9
Obtaining and Activating a Wireless
Account
You may want to use a wireless connection to the Internet in case your
Ethernet WAN connection goes down. Before you can use the wireless
feature, you must obtain a wireless account through a service provider and
then activate the account.
Activation Notices
Please see the wireless account Activation Notices located on the
MultiModem CD. Choose the one for your wireless network provider and
follow the directions to activate your account. These directions are also
included in your ship kit.
Connecting to the Internet
Through the Cellular Providers
Service
Important Note About Provider Fees
Your wireless service provider will charge you for your data usage. Please
check with your provider to make sure you are aware of their charges.
If you plan to use the RouteFinder for large amounts of data transfers,
Multi-Tech recommends an unlimited data plan with your account. Multi-
Tech will not be responsible for any charges relating to your bill.
Connecting to the Internet Steps
1. Turn on your PC and login. Make sure your LAN connection is
set to Obtain an IP Address Automatically (see the section
Setting a TCP/IP Connection)
2. Connect the RouteFinder LAN port to the PC using the RJ45
cable and apply power by plugging in the power cable.
3. Attach the antennas.
4. For EDGE models, make sure your SIM card is inserted correctly.
5. From the workstation, open the command window by clicking the
Start button and selecting Run.
6. Type CMD to open the command window. Click OK.
7. When the command window opens, type IPCONFIG.
8. Check to make sure your LAN connection has received an IP
address in the 192.168.2.x subnet from the RouteFinder. If not,
type IPCONFIG /RELEASE, and then type IPCONFIG /RENEW
to see if you receive an IP address. Close the command window.
Zobrazit stránku 8
1 2 3 4 5 6 7 8 9 10 11 12

Komentáře k této Příručce

Žádné komentáře