Multitech BL-Series Uživatelský manuál stáhnout pdf (Strana 17)

AT Commands for the MT5656ZDX, MT5600ZDX, MT5600BA/BL-Series Modems

Multi-Tech Systems, Inc. Commands Reference Guide (PN S000273D)

Command: +VDR=x,y Distinctive Ring Report

Values: x = 0, 1 Distinctive Ring report control. See description.

(See the MT5600BA/BL–V.90 Section for the V.90 equivalent of this command ).

y = 0–255 Minimum ring interval in 100 ms units. See description.

Default: 0

Description: Enables reporting of ring cadence information to the DTE and specifies the minimum ring

cadence that will be reported.

The report format is one line per silence period and one line per ring period. The length of

the silence period is in the form DROF=number in units of 100 ms<CR><LF>, and the

length of the ring is in the form DRON=number in units of 100 ms<CR> <LF>.

The modem may produce a Ring event code after the DRON message if enabled by the y

parameter. The y parameter must be set to a value equal to or smaller than the expected

ring cadence in order to pass the report to the DTE.

+VDR=0, n/a Disables Distinctive Ring cadence reporting.

+VDR=1, 0 Enables Distinctive Ring cadence reporting. Other call progress result

codes (including RING) are reported as normal.

+VDR=1, >0 Enables Distinctive Ring cadence reporting. The RING result code is

reported after the falling edge of the ring pulse (i.e., after the DRON

report).

+VDR=? Displays the allowed values.

+VDR? Displays the currrent value.

Command: ** Flash Memory Download

Values: n = 0, 1, or 2

Description: **0 Initiate download to flash memory at the last sensed speed.

**1 Initiate download to flash memory at 38.4K bps.

**2 Initiate download to flash memory at 57.6K bps.

Command: *B View Numbers in Blacklist

Values: n/a

Description: If blacklisting is in effect, AT*B displays a list of numbers for which the last call attempted in

the previous two hours failed. Permanently forbidden numbers as defined by country re-

quirements do not appear in this list. If no numbers are blacklisted, only the OK result code

is displayed.

Command: *D View Delayed Numbers

Values: n/a

Description: AT*D displays a list of delayed numbers, as defined in the *B command, together with their

delay times. If no numbers are delayed, only the OK result code is displayed.

Command: $SBn Serial Port Baud Rate (not supported by the MT5600ZDX)

Values: n = speed in bits per second

Default: 57600

Description: $SB300 Set serial port to 300 bps.

$SB1200 Set serial port to 1200 bps.

$SB2400 Set serial port to 2400 bps.

$SB4800 Set serial port to 4800 bps.

$SB9600 Set serial port to 9600 bps.

$SB19200 Set serial port to 19200 bps.

$SB38400 Set serial port to 38400 bps.

$SB57600 Set serial port to 57600 bps.

$SB115200 Set serial port to 115200 bps.

Note: See also the L5 command.

MT5600BA LCD:

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 59 60

Komentáře k této Příručce

Žádné komentáře

Multitech BL-Series Uživatelský manuál Strana 17

Komentáře k této Příručce

Související produkty a manuály pro Sítě Multitech BL-Series