Multitech MTCBA-C-U-N2 Specifikace Strana 57
- Strana / 308
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Chapter 3 – Status Control Commands
Multi-Tech Systems, Inc. AT Commands for EDGE (E1) Modems (S000474A) 57
3.4 AT+CEER Extended Error Report
Description: AT+CEER returns an extended error report regarding the reason of the last
• call release
• failure to set up a call (both mobile originated or terminated)
• failure to modify a call by using Supplementary Services
• failed attempt to activate, register, query, deactivate or deregister a Supplementary
Service
• unsuccessful GPRS attach or unsuccessful PDP context activation
• GPRS detach or PDP context deactivation
The release cause report is presented in numeric format. Default output in case of a non-error-
situation is +CEER: 0,0,0. A description associated with each number can be found in the tables
given in the following subclauses and the relevant GSM specifications.
The first parameter <locationID> serves to locate the other two parameters. Depending on the
failure or release cause either <reason> or <ssRelease> are applicable; i.e., if <reason> ≠ 0,
then <ssRelease> = 0.
Vice versa, if <reason> = 0, then <ssRelease> may be ≠ 0.
In addition to AT+CEER, the command ATS18 can be used to check especially the status of data
calls.
Syntax: Exec. Command: AT+CEER
Responses: +CEER: <locationID>, <reason>, <ssRelease>
OK
ERROR
+CME ERROR: <err>
Test Command: AT+CEER=?
Responses: OK
ERROR
+CME ERROR: <err>
Parameters:
<locationID>
Location ID as number code. Location IDs are listed in Section 3.4.1, Cause Location ID
for the extended error report. Each ID is related with another table that contains a list of
<reason>s or <ssRelease>s.
<reason>
Reason for last call release as number code. The number codes are listed in several
tables, sorted by different categories in the following subclauses. The tables can be
found proceeding from the Location ID given in Section 3.4.1, Cause Location ID for the
extended error report.
<ssRelease>
Release cause for last Supplementary Service call (listed in Section 3.4.5, GSM
Release cause for Supplementary Service Call).
Examples:
Example 1
ATD”01751223344”; A mobile originated call is rejected by the remote party.
NO CARRIER Call setup is terminated with NO CARRIER.
AT+CEER To check the cause, the caller enters AT+CEER.
+CEER: 8,21,0 The Location ID 8 in Section 3.4.1 points to Section 3.4.4, where 21 =
OK “Call rejected”. 0 = “No error” refers to parameter <ssRelease> that is not
applicable.
Example 2
The user attempts to activate call barring, but uses the wrong password.
AT+clck=oi,1,”0000”,3;
+CME ERROR: incorrect password
AT+CEER
+CEER: 35,0,38 The Location ID 35 in Section 3.4.1 points to Section 3.4.9, where 38 =
OK “negative PW check” may mean that a wrong password was tried for the first
time. 0 = “No error” refers to parameter <reason> that is not applicable.
- Wireless EDGE (E1) Modems 1
- Table of Contents 3
- Chapter 1 – Introduction 8
- 1.4 AT Command Syntax 9
- Ö 5C \ \5C 5C 35 43 11
- “ 22 “ \22 5C 32 32 11
- @ 00 NULL \00 5C 30 30 11
- 1.8 Errors and Messages 16
- Chapter 2 – Configuration 19
- Profile 20
- Monitoring 22
- Capabilities List 26
- Unsolicited Result Code 35
- Parameter Descriptions: 35
- Chapter 3 – Status Control 47
- 4.5 AT\Q Flow Control 66
- 4.6 AT+IFC Flow Control 67
- 4.9.1 Autobauding 71
- Chapter 6 – Identification 87
- Identity (IMEI) 89
- Identity (IMSI) 90
- 7.2 ATA Answer a Call 92
- Memory and Index Number 94
- Using Index Number 95
- GSM04.08 Release Cause 98
- Answering a Call 99
- Completion 100
- Dialing Modifier 101
- Absence of Data Carrier 101
- PPP Online Mode 102
- Indication 110
- Chapter 8 – Network Service 113
- Commands 113
- 8.10.1 AT^MONI Responses 123
- 8.10.2 Service States 124
- 8.11.1 AT^MONP Responses 125
- (ACMmax) Set or Query 130
- Control 133
- 9.7 AT+CCWA Call Waiting 136
- In case of an 144
- 10.11.1 Example: Ping 171
- Service Profiles 176
- Chapter 11 – GPRS Commands 187
- Acceptable) 193
- (Requested) 196
- 4 (Best Effort) Unspecified 200
- Connection 207
- Parameters 208
- Context Activation 209
- PDP Context Activation 210
- (SMS) Commands 214
- <CTRL-Z>/<ESC> 221
- ME/TE Phase 2+ Only 222
- Preferred Store 230
- Mode or Query SMS Overflow 234
- Status to REC READ 234
- (SAT) Commands 243
- Phonebook 254
- Alphabetically 258
- Chapter 16 – Audio Commands 260
- Default Values 265
- Parameter 268
- Deferred Shutdown 279
- Chapter 18 – Miscellaneous 282
- Chapter 19 – Summary Tables 284
- Operating Mode of ME 291
Související produkty a manuály pro Sítě Multitech MTCBA-C-U-N2
Sítě Multitech MTCMR-H Specifikace
(56 stránky)
(56 stránky)
Sítě Multitech CDMA Specifikace
(129 stránky)
(129 stránky)
Sítě Multitech MT2834BA Uživatelský manuál
(7 stránky)
(7 stránky)
Sítě Multitech ISIHP-2U Uživatelský manuál
(63 stránky)
(63 stránky)
Sítě Multitech MT2834BL Specifikace
(225 stránky)
(225 stránky)
Sítě Multitech MT56DSU-R Uživatelský manuál
(11 stránky)
(11 stránky)
Sítě Multitech MTSMC-C-N3 Uživatelský manuál
(14 stránky)
(14 stránky)
Sítě Multitech MT2834ZDX Uživatelský manuál
(20 stránky)
(20 stránky)
Sítě Multitech MVP30-60 Uživatelský manuál
(4 stránky)
(4 stránky)
Sítě Multitech MULTIVOIP MVP-810 Uživatelská příručka
(163 stránky)
(163 stránky)
Sítě Multitech FF830 Uživatelská příručka
(151 stránky)
(151 stránky)
Sítě Multitech MTR-C2 Uživatelský manuál
(20 stránky)
(20 stránky)
Sítě Multitech GFU19 Uživatelský manuál
(210 stránky)
(210 stránky)
Sítě Multitech MTCMR-H Uživatelská příručka
(147 stránky)
(147 stránky)
Sítě Multitech MTSMC-C-N3 Uživatelský manuál
(24 stránky)
(24 stránky)
Infineon AET660UD00-30D manuels
Manuels d'utilisation et guides de l'utilisateur pour Modules de mémoire Infineon AET660UD00-30D.
Nous fournissons des manuels en pdf 1 Infineon AET660UD00-30D à télécharger gratuitement par type de document : Fiche technique
Komentáře k této Příručce