Multitech MTCMR-E1 Uživatelský manuál stáhnout pdf (Strana 93)

Part 5 – GPIO AT Commands

Universal IP AT Commands Reference Guide 93

Stack

Function: The desired stack function to be specified on a GPIO trigger. The stack function must be

properly configured; i.e., for a sendmail function, all proper sendmail items must be configured.

Values: 0 - Disabled (The GPIO will not trigger)

1 - #SENDMAIL1

2 - #SENDMAIL2

3 - #SENDMAIL3

4 - #PUTMAIL

5 - #GETMAIL

6 - #LTCPSTART=1

7 - #OTCP=1

8 - #OUDP=1

9 - #LUDPSTART=1

Hangup: Determines whether to disconnect from the network after GPIOs have been processed.

Values: 0 - Physical connection disconnects when all GPIOs have been processed

1 - Physical connection stays connected.

2 - Physical connection disconnects when all GPIOs have been processed; suppress

responses

3 - Physical connection stays connected; suppress responses

Default: 1,1,0,0,0,0,x

2,1,0,0,0,0,x

3,0,0,0,0,0,x

4,0,0,0,0,0,x

5,3,0,0,0,0,x

Note: The final number (represented by ‘x’) is variable and not supported at this time.

Example: AT#GPIO=1,0,1,180,1,0

GPIO 1 would be configured as a Digital Input with internal pullup (0).

A positive voltage will trigger the GPIO (1).

A Debounce time of 180 ms (180) will be used.

#SENDMAIL1 will be called if the GPIO triggers (1).

After processing the GPIO, the physical connection will be disconnected (0) and all responses

will be printed to the user.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 118 119

Žádné komentáře

Multitech MTCMR-E1 Uživatelský manuál Strana 93