Multitech RF760 Uživatelský manuál Strana 17

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 18
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 16
Example 2 – Overview
Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D) 17
Example 2 – LAN-to-LAN Configuration Chart
For LAN-to-LAN connectivity, the RF760VPN, RF660VPN and RF600VPN RouteFinders utilize the IPSec protocol to
provide up to 100 tunnels (RF760VPN) with strong 168-bit 3DES encryption using IKE and PSK key management. In
addition, the RF760VPN, RF660VPN and RF600VPN provide high performance with up to 50Mbps (RF760VPN) of
3DES encryption throughput.
Site A - Static IP Addresses (Input These Parameters
For the RF660VPN in the Home Office).
Site B - Static IP Addresses (Input These Parameters
For the RF660VPN in the Branch Office
1. Domain name = site-A.com
2. Public Class C = 204.26.122.x
1. Domain name = site-B.com
2. Public Class C = 204.26.122.x
3
. Networks & Services > Networks
LAN: 192.168.2.0 – 255.255.255.0
RemoteLAN: 192.168.10.0 – 255.255.255.0
RemoteWAN_IP: 204.26.122.3 – 255.255.255.255
3. Networks & Services > Networks
LAN: 192.168.10.0 – 255.255.255.0
RemoteLAN: 192.168.2.0 – 255.255.255.0
RemoteWAN_IP: 204.26.122.103 –255.255.255.255
4
. Network Setup > Interface
Default gateway = 204.26.122.1
Host name = RF660VPN.site-A.com
Eth0 = LAN, 192,168.2.1, 255.255.255.0
Eth1 = WAN, 204.26.122.103, 255.255.255.0
Eth2 = DMZ (don’t care)
4
. Network Setup > Interface
Default gateway = 192.168.0.1
Host name = RF660VPN.site-B.com
Eth0 = LAN, 192.168.10.1, 255.255.255.0
Eth1 = WAN, 192.168.0.2, 255.255.255.0
Eth2 = DMZ (don’t care)
5. Packet Filters > Packet Filter Rules
LAN – Any – Any – Accept
RemoteLAN – Any – Any – Accept
5. Packet Filters > Packet Filter Rules
LAN – Any – Any – Accept
RemoteLAN – Any – Any – Accept
6. VPN > IPSec
Check and Save VPN Status
Add a Manual connection:
Connection name = SiteA
Authentication Method = ESP3-DES(MD5-96)
SPI Base = 0x201
ESP Encryption Key (must be the same at both sites)
Authentication Key (must be the same at both sites)
Local WAN IP = WAN
Local LAN = LAN
Remote Gateway IP = RemoteWAN_IP
Remote LAN = RemoteLAN
6. VPN > IPSec
Check and Save VPN Status
Add a Manual connection:
Connection name = SiteB
Authentication Method = ESP3-DES(MD5-96)
SPI Base = 0x201
ESP Encryption Key (must be the same at both sites)
Authentication Key (must be the same at both sites)
Local WAN IP = WAN
Local LAN = LAN
Remote Gateway IP = RemoteWAN_IP
Remote LAN = RemoteLAN
Zobrazit stránku 16
1 2 ... 12 13 14 15 16 17 18

Komentáře k této Příručce

Žádné komentáře