
Example 2 – Site A and Site B
Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D) 18
Site A Configuration To configure the RF760VPN/RF660VPN/RF600VPN at Site A,
follow the same procedure as in Example 1 – Site A.
Site B Configuration
NAT Box Configuration at Site B.
Configure the RF760VPN/RF660VPN/RF600VPN at Site B following the procedure in Example 1– Site B, but
use the Wizard Setup to change the WAN IP Address to 192.168.0.2 and the Gateway to 192.168.0.1.
Configure the NAT box for an IPSec Pass-Through by specifying the IP address and subnet mask assigned by
the ISP for Site B (Ex: 204.26.122.3). Then specify the ISP Gateway Address (Ex: 204.26.122.103).
Komentáře k této Příručce