Multitech MTR-C2 Uživatelský manuál stáhnout pdf (Strana 14)

14

TECHNOLOGY | 802.15.4 / SUB-GIG

14

TECHNOLOGY | ANTENNAS

14

TECHNOLOGY | BLUETOOTH

14

TECHNOLOGY | CELLULAR

14

TECHNOLOGY | GPS / GNSS MODULE

14

TECHNOLOGY | WI-FI

14

ATMEL: SMARTCONNECT WINC1500 WIRELESS

NETWORK CONTROLLER

Figure 1: WINC1500

WINC1500 Target Applications

• IoT applications

• Smart appliances

• Multimedia streaming

• Safety and security

• Home automation

• Consumer electronics

• Industrial automation

• IEEE 802.11 b/g/n (1x1) for up to 72

Mbps

• Integrated PA and T/R switch

• Superior sensitivity and range via

advanced PHY signal processing

• Wi-Fi Direct, station mode and Soft-

AP support

• Supports IEEE 802.11 WEP, WPA

• On-chip memory management

engine to reduce host load

• 4 Mbit internal Flash memory with

OTA ﬁrmware upgrade

• SPI, UART and I2C as host interfaces

• TCP/IP protocol stack (client/server)

sockets applications

• Network protocols (DHCP/DNS),

including secure TLS stack

• WSC (wireless simple conﬁguration

WPS)

APPLICATIONS FEATURES/SPECS

The Atmel® SmartConnect

WINC1500 is an IEEE 802.11 b/g/n

IoT network controller SoC. It offers

the ideal add-on to existing MCU

solutions, making it easy to bring

Wi-Fi and Network capabilities

through UART or SPI-to-Wi-Fi

interfaces into your designs. The

WINC1500 connects to any Atmel

AVR® or Atmel | SMART MCU, and

has minimal resource requirements.

The most advanced mode in the

WINC1500 is a single stream 1 x1

802.11n mode, providing up to

72 Mbps PHY of throughput. The

WINC1500 features a fully integrated

power ampliﬁer, LNA, switch, and

power management modes.

The WINC1500 also provides

internal Flash memory as well as

multiple peripheral interfaces,

including UART, SPI, and I2C.

The only external clock source

needed for the WINC1500 is a

high-speed crystal or oscillator with

a wide variety of reference clock

frequencies supported (between

12 – 32 MHz). The WINC1500 is

available in a QFN package.

Figure 2: WINC1500 Block Diagram

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Komentáře k této Příručce

Žádné komentáře