Multitech RF760 Uživatelský manuál stáhnout pdf (Strana 26)

Example 2 – LAN-to-LAN Fixed IP Addresses Using RF760/660/600VPN and RF560/550VPN

Multi-Tech Systems, Inc. RF760VPN/RF660VPN/RF600VPN Setup Examples Reference Guide (S000283D) 26

Testing the Site B Workstation Connected to LAN Port of RF550VPN:

a) At the DOS prompt ping a workstation connected to the LAN port of the RF660VPN at Site A.

Example: Ping 192.168.2.100 <return>

You should see four successful packet transmit/receive statements. If you do not, try several more times. You

may see several initial failures while the two RouteFinders make a secure connection.

b) If this fails, try to ping the WAN port of the RF660VPN at Site A.

Example: Ping 204.26.122.103

You should see four successful packet transmit/receive statements. If you do not, try several more times. You

may see several initial failures while the two RouteFinders make a secure connection.

c) If this fails, try to ping the WAN port of the RF550VPN at Site B.

Example: Ping 204.26.122.3

Note: If any of these tests fail then verify that the workstation is connected to a LAN port of the

RF560VPN/RF550VPN. The LAN port LINK LED should be on and the ACT LED should blink on each time you ping

the RF560VPN/RF550VPN. Also verify that the RF550VPN is configured properly.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 38 39

Žádné komentáře

Multitech RF760 Uživatelský manuál Strana 26