Multitech RF760 Uživatelský manuál stáhnout pdf (Strana 30)

Example 3 – LAN-to-LAN Fixed IP Addresses Using RF560/550VPN

Multi-Tech Systems, Inc. RF760VPN/RF660VPN/RF600VPN Setup Examples Reference Guide (S000283D) 30

Example 3 - Site A Configuration

Note: To configure the RF660VPN at Site A follow the same procedure as in Example 1, except for the following

items in the RF660VPN configuration:

1. Click on Networks & Services > Network.

a) Define the IP network configured on the remote LAN ports (the private LAN on the RF550VPN at Site B).

For example: Name = RemoteLAN

IP address = 192.168.10.0

Subnet mask = 255.255.255.0

b) It is not necessary to define the IP address that is configured on the remote RF550VPN WAN port.

After the IP network information is entered, it displays in the Network/Host list on this screen.

RemoteLAN 192.168.10.0 255.255.255.0

2. Click on Packet Filters > Packet Filter Rules. The rule for LAN should already be present.

a) Change the lan – Any – Any - ACCEPT rule to Any – Any – Any – ACCEPT. This allows the LAN at Site A

access to any service on the Internet. After this is entered, it displays at the bottom of the screen.

1 Any Any Any ACCEPT

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 38 39

Žádné komentáře

Multitech RF760 Uživatelský manuál Strana 30