Multitech RF760 Uživatelský manuál stáhnout pdf (Strana 8)

Example 1 – LAN-to-LAN Fixed IP Addresses Using RF760/660/600VPN

Multi-Tech Systems, Inc. RF760VPN/RF660VPN/RF600VPN Setup Examples Reference Guide (S000283D) 8

8. Click on Wizard Setup. Enter information for Site A of this example.

a) Enter the Administrator Email Address (can be anything). (Example: admin@yourdomain.com

)

b) Enter the Host name for the RouteFinder (can be anything). (Example: RF660VPN.Site-A.com)

c) LAN IP Address and Subnet Mask should already be set to the defaults. This should be acceptable for Site A.

d) Enter the WAN IP Address. This is the PUBLIC STATIC IP address. (Example: 204.26.122.103)

e) Change the Gateway IP address; this is the IP address of the router that connects to the Internet. (Example:

204.26.122.1)

f) Place a checkmark in the box for the Packet Filter Rule: LAN-ANY-ANY-ALLOW. This will enable this rule.

g) Specify any changes to the passwords that you feel are necessary.

h) Click Save to save the settings you just entered.

i) The following screen will display to save changes. Click on OK.

j) The following screen displays. Saving your settings will take a few minutes. Since you kept the LAN IP address

the same, it is not necessary to change this system to a new IP address.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 38 39

Žádné komentáře

Multitech RF760 Uživatelský manuál Strana 8