Multitech RF560VPN Uživatelský manuál stáhnout pdf (Strana 10)

Multi-Tech Systems, Inc.

RF550/560VPN Reference Guide – RF550/560VPN Using a NAT Box with IPSec Pass-Through 10

14. The VPN Settings screen for entering specific VPN settings will display. The screen pictured below

assumes IKE is selected as the Secure Association. The Connection Name (IPSec Pass

Through) defaults into the first field. This screen can be configured to support the NAT box at Site B

using a static or dynamic IP address. Continue to enter the following settings:

a) Select Enable UID (Unique Identifier String)

b) Local IPSec Identifier: Enter the IP address that identifies the Local IPSec for this connection.

Example: 204.26.122.103

c) Remote IPSec Identifier: Enter the IP address that identifies the Remote IPSec for this

connection. Example: 10.10.10.2

d) Disable (do not check) Enabled Keep Alive

e) Disable (do not check) Enabled NetBIOS Broadcast

f) Remote Site: LAN

g) Remote IP Network: Enter the remote IP address (SSH client) for Site B.

Example: 10.10.10.2

h) Remote IP Netmask: Enter the remote IP Netmask (SSH client) for Site B.

Example: 255.255.255.255

i) Remote Gateway IP/FQDN: Enter the Remote Gateway IP address (WAN) for Site B.

Example: 204.26.122.3 for static or 0.0.0.0 for dynamic)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 41 42

Žádné komentáře

Multitech RF560VPN Uživatelský manuál Strana 10