Multitech RF560VPN Uživatelský manuál stáhnout pdf (Strana 4)

Multi-Tech Systems, Inc.

RF550/560VPN Reference Guide – RF550/560VPN Using a NAT Box with IPSec Pass-Through 4

Software Configuration

Example 1: Configuration Procedure at Site A

1. Connect a workstation to one of the RF550VPN/RF560VPN’s LAN ports via Ethernet at Site A.

Set the workstation IP address to 192.168.2.x subnet.

3. Apply power to the RF550VPN/RF560VPN RouteFinder and allow the LEDs to stabilize on the unit.

Bring up your web browser on the workstation. At the web browser’s address line, type the Gateway

address of http://192.168.2.1 and hit the Enter key.

Note: Make sure your workstation’s IP address is in the same network as the router’s address.

WINIPCFG and IPCONFIG are tools for finding a computer’s default gateway and MAC address. In

Windows 98/Me you can type WINIPCFG. In Windows 2000/NT, you can type IPCONFIG.

After typing the IP Address in the web browser, the RF550VPN/RF560VPN main menu displays.

1 2 3 4 5 6 7 8 9 ... 41 42

Žádné komentáře

Multitech RF560VPN Uživatelský manuál Strana 4