Multitech RF560VPN Uživatelský manuál Strana 32

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 42
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 31
Multi-Tech Systems, Inc.
RF550/560VPN Reference Guide – RF550/560VPN Using a NAT Box with IPSec Pass-Through 32
c) Remote IPSec Identifier – Enter an IP address that identifies the Remote IPSec for this
connection. (Ex: 192.168.0.2)
d) Remote IP Network – Enter the Remote IP Network address (LAN) for Site B. (Ex:
10.10.10.0)
e) Remote IP Netmask – Enter the Remote IP Netmask address for Site B. (Ex: 255.255.255.0)
f) Remote Gateway IP – Enter the Remote Gateway IP address (WAN) for Site B. (Ex:
204.26.122.3) If Site B is using dynamic IP addressing, set this value to 0.0.0.0.
g) Network Interface Select the Network Interface from the drop-down list box. (Ex: WAN
Ethernet)
h) Secure Association – Select IKE to set how inbound packets will be filtered. IKE is the
default. IKE primarily encompasses router key exchange and the negotiation of security policy.
Selecting IKE displays field h-l.
i) Perfect Forward SecureCheck the Enabled button.
j) Encryption Protocol – Select the encryption protocol used for your configuration. The default
protocol for the RF550VPN/RF560VPN communicating with another RF550VPN/RF560VPN is
3DES. (Ex: 3DES)
k) PreShared Key – Enter the PreShared Key name (you can enter an alphanumeric name but it
needs to match the security code for the RouteFinder at Site B).
l) Key Life – Enter the amount of time that tells the router to renegotiate the Key. For example,
3600 seconds is 60 minutes.
m) IKE Life Time – Enter the amount of time that tells the router to renegotiate the IKE security
association. For example, 28800 seconds is 8 hours.
4.
Click the Save button. The data entered on this screen will be displayed on the VPN Settings screen
where you
can enable/disable, edit or delete them. To enable this connection, check the Enable box
that appears to the left of the connection name.
5.
Save and restart the RouteFinder.
This completes the configuration of the RF550VPN/RF560VPN at Site A.
Zobrazit stránku 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 41 42

Komentáře k této Příručce

Žádné komentáře