Multitech MT5634HD16 Uživatelská příručka stáhnout pdf (Strana 119)

4 Browser Management

CommPlete Communications Server 109

NO CARRIER string, NO DIALTONE string, NO ANSWER string, Connect

Response string, OK string, ERROR string, RING string, BUSY string

These fields display the modem’s result codes, which are used by RASExpress to

monitor calls. They should be spelled exactly the same as the modem sends them. By

default, these boxes are set for verbose responses. If your modem is set for terse

responses, refer to the modem’s manual for the terse response codes.

OSPF Setup

OSPF (Open Shortest Path First) is an internal gateway protocol. Designed for IP

networks, OSPF supports variable length subnet masks (VLSM), which allows more

efficient allocation of IP addresses than RIP-1, and tagging of externally derived

routing information. OSPF also allows packet authentication and uses IP multicast

when sending or receiving packets.

Use the OSPF Configuration page to enable the OSPF protocol on the RASExpress

server. When you are done, click Submit to save the information and return to the

Configuration of Server menu, or click Reset to cancel your changes.

OSPF Routing

Select Enabled to enable OSPF routing on the server.

Router ID

Type the identifier for the OSPF router. It has the same format as an IP address, but

identifies the router independent of its IP Address.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 291 292

Žádné komentáře

Multitech MT5634HD16 Uživatelská příručka Strana 119