Multitech MT5634HD16 Uživatelská příručka stáhnout pdf (Strana 203)

CommPlete Communications Server 193

Learning Network Numbers

Select Enabled to allow the RASExpress server to automatically detect and use the

network’s numbers.

Note: The server needs some time to learn the IPX address of the LAN segment it is

attached to. If it is unable to learn the address, it will use the default network address

as configured. If the RASExpress server comes up before the file server and uses the

default address, you will get a warning on your file server about conflicting network

numbers. If this happens, reboot the RASExpress server.

Internal Network Number

Type the IPX internal network number for the RASExpress server. This number

should be unique on the network.

Route NetBIOS Over IPX Packets

This option enables the routing of NetBIOS over IPX packets. Select Yes if you are

running applications on NetBIOS over IPX. Select No if you do not need this option.

802.3

Select Yes to enable routing of 802.3 IPX packets on the LAN, then type a network

number for the 802.3 frame type.

802.2

Select Yes to enable routing of 802.2 IPX packets on the LAN, then type a network

number for the 802.2 frame type.

Type_II

Select Yes to enable routing of Ethernet_II IPX packets on the LAN, then type a net-

work number for the Ethernet_II frame type.

SNAP

Select Yes to enable routing of Ethernet SNAP IPX packets on the LAN, then type a

network number for the Ethernet SNAP frame type.

Press E

SC when finished.

PPP Configuration

To open the PPP Configuration window, select Point-to-Point Protocol Setup from

the Server Setup menu.

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 291 292

Žádné komentáře

Multitech MT5634HD16 Uživatelská příručka Strana 203