Multitech MT5634HD16 Uživatelská příručka stáhnout pdf (Strana 38)

RASExpress User Guide

28 CommPlete Communications Server

BCP

This field shows the status of the Bridge Control Protocol (BCP) for the port. Enable

BCP if the other end of the PPP link supports BCP.

IPCP

This field enables IP for the port. Select disabled if TCP/IP or PPP is not to be used.

Local Address

This field shows the IP local network address of the port. This address can be edited

only for LAN-to-LAN ports, and only if IPCP is enabled. For all client-to-LAN

connections, the local address is the same as the IP address of the LAN port. For

LAN-to-LAN ports, make sure the IP address is on a different network or a subnet of

any of the existing networks.

Remote Address

This field shows the IP network address of the port. It is the address assigned to the

remote PPP client. It must be on the same network as the IP local address. This field

can be edited only if IPCP is enabled for the port. It cannot be edited for client-to-

LAN ports if DHCP is enabled.

Subnet Mask

This field contains the mask used to specify the subnetwork part of the IP address.

For all client-to-LAN connections it is the same as the LAN network. See “IP

Addressing” on page 7.

VJ Compression

Select enabled to enable Van Jacobson compression of TCP/IP headers on the PPP

link. VJ compression is used by many PPP clients. Select disabled to disable Van

Jacobson compression. If IPCP and VJ Compression are enabled, a dial-in PPP client

that uses this compression method may experience greater speed than with VJ

Compression disabled.

Forward Broadcast

This field allows you to enable or disable forwarding of UDP broadcast packets onto

the port. Enable it if your UDP applications depend on the broadcasts. When for-

warding is enabled, the RASExpress server forwards to the selected port all UPD

broadcast packets that come from the LAN and from the client-to-LAN ports. For-

warding broadcasts on remote links increases the traffic on the links, so enable for-

warding only if necessary.

Multilink PPP

Menu path: Main Menu ➔ Configuration of Server ➔ Server Setup ➔ Multilink

PPP.

[ 1] Multilink PPP : enabled

[ 2] GroupEPD : c0a85a04

[ 3] Bundle Server IP Address : 000.000.000.000

[ 4] Bundle Server UDP Port : 582

[ESC] Previous Menu

Use this menu to set up Multilink PPP on the RASExpress server. The Multilink PPP

protocol bonds two physical ports to one IP address for greater bandwidth.

RASExpress 5.40 introduced MultiChassis Multilink support, which enables the

bundling of multilink connections across different RASExpress servers, as would be

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 291 292

Komentáře k této Příručce

Žádné komentáře

Multitech MT5634HD16 Uživatelská příručka Strana 38

Komentáře k této Příručce

Související produkty a manuály pro Sítě Multitech MT5634HD16