Multitech MT5634HD16 Uživatelská příručka stáhnout pdf (Strana 227)

CommPlete Communications Server 217

ISDN Primary Rate Interface

When you select ISDN Primary Rate Interface from the Communication Types

menu, the ISDN Primary Rate Interface window appears.

Use the ISDN Primary Rate Interface window to modify settings for the RASExpress

server’s ISDN PRI communication card. To change a setting, select the field and type

a new value.

ISDN Primary Rate Interface

Use this field to enable or disable ISDN PRI support by the RASExpress server.

Enable it only if an ISDN PRI card is installed in the server

I/O Address

This is the base I/O address for the PRI card, in hexadecimal format. It provides the

RASExpress server with information about card activity, and allows the card to use

one interrupt for all 23 ports on the card. Only one PRI card can be used in a RAS-

Express server. The I/O address must be unique. The default value is 2F0.

IRQ Number

This is the interrupt number for the PRI card. The IRQ number must be unique to the

card. The IRQ requests the attention of RASExpress and the server’s microprocessor.

The default value is 7.

Memory Address

The PRI card shares memory with the RASExpress server for internal communication.

Type the shared memory address in hexadecimal format in this field. The default

value is D000.

Number of Ports

Select the number of ports available to the ISDN PRI card. In North America, 23 data

channels are standard; in Europe 30 data channels are standard.

Modem Setup

Note: Because of the 640K memory limitation in DOS, the Modem Setup menu

cannot be accessed while the network files are running. To unload the network files,

from the

C:\ prompt, type mtslsl -u <CR>. Alternately, reboot the server. When the

message

Starting MS-DOS appears, press F5 to bypass AUTOEXEC.BAT. Then

change to the RASExpress directory and type rascon <CR> to start RASCON.

Select Modem Setup from the Main Menu. The List of Modems window appears. If

your modem type is not listed, press I

NSERT and, when the Modem Information

window appears, type in your modem’s name.

1 2 ... 222 223 224 225 226 227 228 229 230 231 232 ... 291 292

Žádné komentáře

Multitech MT5634HD16 Uživatelská příručka Strana 227