Multitech MT5634HD16 Uživatelská příručka stáhnout pdf (Strana 205)

CommPlete Communications Server 195

protocol for IPX. It is responsible for configuring, enabling, and disabling the IPX

protocol modules on both ends of the point-to-point link.

Network Number

This field shows the IPX network number of the port. There is a unique number for

each port that does not correlate with the existing network number. You can edit this

field only if IPXCP is enabled.

Node Number

This field shows the IPX remote node number of the port. Each port must have a

unique node number. You can edit this field only if IPXCP is enabled.

CIPX Compression

Select Enable to enable CIPX (Compressed Internetwork Packet Exchange) com-

pression of IPX headers for the port. Select Disable if you do not want CIPX com-

pression. If you select Enable, CIPX compression must also be enabled on the server

for your choice to have an effect. You can edit this field only if IPXCP is enabled.

NetBIOS over IPX

This field allows you to enable or disable routing of NetBIOS over IPX packets

through the port. Enable it if you are using applications that require NetBIOS over

IPX support. You can edit this field only if IPXCP is enabled.

BCP

This field shows the status of the Bridge Control Protocol (BCP) for the port. Enable

BCP if the other end of the PPP link supports BCP.

IPCP

This field enables IP for the port. Select Disabled if TCP/IP or PPP is not to be used.

Local Address

This field shows the IP local network address of the port. This field can be edited only

for LAN-to-LAN ports, and only if IPCP is enabled. For all client-to-LAN

connections, the local address is the same as the IP address of the LAN port. For

LAN-to-LAN ports, make sure the IP address is on a different network or a subnet of

any of the existing networks.

Remote Address

This field shows the IP network address of the port. It is the address assigned to the

remote PPP client. It must be on the same network as the IP local address. This field

can be edited only if IPCP is enabled. It cannot be edited for client-to-LAN ports if

DHCP is enabled.

Subnet Mask

This field contains the mask used to specify the subnetwork part of the IP address.

For all client-to-LAN connections it is the same as the LAN network. See “IP

Addressing” on page 7.

VJ Compression

Select Enabled to enable Van Jacobson compression of TCP/IP headers on the PPP

link. VJ compression is used by many PPP clients. Select Disabled to disable Van

Jacobson compression. If IPCP and VJ Compression are enabled, a dial-in PPP client

that uses this compression method may experience greater speed than with VJ

Compression disabled.

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 291 292

Komentáře k této Příručce

Žádné komentáře

Multitech MT5634HD16 Uživatelská příručka Strana 205

Komentáře k této Příručce

Související produkty a manuály pro Sítě Multitech MT5634HD16