Multitech MT5634HD16 Uživatelská příručka stáhnout pdf (Strana 99)

4 Browser Management

CommPlete Communications Server 89

Multilink PPP

Use this page to set up Multilink PPP on the RASExpress server. The Multilink PPP

protocol bonds multiple ports to one IP address for greater bandwidth. When you are

done, click Submit to save the information and return to the Configuration of Server

menu, or click Reset to cancel your changes.

Note: RASExpress has MultiChassis Multilink support, which enables the bundling

of multilink connections across different RASExpress servers. All MultiChassis

Multilink servers must have IP and PPTP turned on to enable the servers to talk to

each other. Also, all MultiChassis Multilink servers should point to the same RADIUS

or TACACS+ server.

Multilink PPP

Select Enabled to enable Multilink PPP (MLPPP) support on the RASExpress server.

RASExpress supports Multilink PPP for both analog and ISDN channels.

Group EPD

Identifies the bundle group that the RASExpress server belongs to. The EPD (End

Point Descriminator) is an arbitrary four-byte hexadecimal value. By default

RASExpress initializes it to the IP address of its Ethernet interface. However, all

servers that belong to the same bundle group should have the same EPD.

Bundle Server IP Address

Type the IP address of the Bundle Server. The Bundle Server is the RASExpress 5.40

or later server chosen to manage the multichassis multilinks. It can be any RASExpress

5.40 or later server on the network, but the optimal server is the one that is equidis-

tant from all RASExpress servers in the bonding group. If the servers are on different

networks, then the hop count from the Bundle Server to all the other servers should

be more or less equal. Alternately, the one that is least busy can function as the Bundle

Server.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 291 292

Žádné komentáře

Multitech MT5634HD16 Uživatelská příručka Strana 99